Filter
Top Products
Page 304 of 378 Maintenance
553-3001-202 Standard 1.00 April 2000
Information equivalent to that provided by the STAT command can be
accessed from the command line on the card.
STAT l s c Print the Meridian 1 software status of the indicated card,
where: l = loop, s = shelf, and c = card.
STAT l s c u Print the Meridian 1 software status of the indicated unit,
where: l = loop, s = shelf, c = card, and u = unit.
Note 1:
For Option 11C and Option 11C Mini, the TN address < l s c > should be replaced by < s c > and
the < l s c u > address by < s c u >.
Table 46
Supported Overlay 36 commands
Command Function
DISC l s c Disable the indicated card, where: l = loop, s = shelf, and
c = card.
DISU l s c u Disable the indicated unit, where: l = loop, s = shelf,
c = card, and u = unit.
ENLC l s c Enable the indicated card, where: l = loop, s = shelf, and
c = card.
ENLU l s c u Enable the indicated unit, where: l = loop, s = shelf,
c = card, and u = unit.
LDIC l s c u List the number of days since the last incoming call on
the indicated trunk, where: l = loop, s = shelf, c = card,
and u = unit.
STAT l s c Print the Meridian 1 software status of the indicated card,
where: l = loop, s = shelf, and c = card.
RSET l s c u Reset thresholds for the indicated trunk, where: l = loop,
s = shelf, c = card, and u = unit.
Note 1:
For Option 11C and Option 11C Mini, the TN address < l s c > should be replaced by < s c > and
the < l s c u > address by < s c u >.
Table 45
Supported Overlay 32 commands (Part 2 of 2)
Command Function