Page 206 of
378
Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
3 Enter the Radius accounting server IP address. Add the same
Accounting Server IP address configured in the Card Routing Table
entries as discussed in “Configure SNMP Traps/Routing and IPs tab”
on page 204.
4 Change the default port number from the default (1813), if required.
5 Enter the key. The key is a signature for authentication of the Radius
records. It can be a maximum of 64 alphanumeric characters.
6 Click Apply.
Figure 34
ITG Node Properties window - Accounting Server tab