Filter
Top Products
Page 292 of
378
OA&M using the ITG shell CLI and overlays
553-3001-202 Standard 1.00 April 2000
Enable an indicated ITG card
To enable a indicated ITG card in LD 32, use the following command:
Enable an indicated ITG port
To enable a indicated ITG port in LD 32, use the following command:
Display ITG card ID information
To display the ITG card ID in LD 32, use the following command:
Display ITG card status
To display the status of a indicated ITG card in LD 32, use the following
command:
ENLC l s c Enable the indicated ITG card,
where: l = loop, s = shelf,
c = card
ENLU l s c u Enable the indicated ITG unit
(port),
where: l = loop, s = shelf,
c = card
IDC l s c Display the card ID for the ITG
card, where: l = loop, s = shelf,
c = card
STAT l s c Display the status of the indicated
ITG card, where: l = loop, s = shelf,
c = card