Filter
Top Products
Page 212 of
378
Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
Figure 37
ITG Dialing Plan - Remote Node Properties window - Digits dialed tab
1
2
4
3
1.
Dial Plan
- Click on
the pull-down list to display ESN translation types/ISDN call types.
2.
Dial plan digits
- Dial plan digits are the Called Number digits in the ISDN Signalling Call
Setup message sent by Meridian 1 after digit absorption, insertion and manipulation by
Meridian 1.
3.
Number of leading digits to delete
- The number of leading digits to delete from the
Called Number digits in the Call Setup message sent by Meridian 1 before the ITG Trunk
card sends the Call Setup message on outgoing calls.
4.
Leading digits to insert -
The leading digits to insert before the ITG Trunk card sends
the Call Setup message on outgoing calls.
5