Filter
Top Products
Page 262 of
378
OA&M using MAT applications
553-3001-202 Standard 1.00 April 2000
Add an ITG ISL Trunk node on MAT by retrieving an existing
node
After you have manually configured and installed an ITG node, you can add
that node to another MAT PC by retrieving the configuration data from the
existing ITG node.
You can use this
optional
procedure:
• to combine existing ITG ISL Trunk nodes on the network that were
originally configured from different MAT PCs onto one MAT PC to
manage the ITG ISL Trunk network from a single point of view.
• to restore the ITG ISL Trunk configuration database to a MAT PC whose
hard drive had failed. (You can also restore the MAT ITG nodes from the
MAT Disaster Recovery Backup.)
• to temporarily create a copy of the ITG ISL Trunk node configuration on
for maintenance and diagnostic purposes. For example, you can create a
copy of an ITG ISL Trunk node database on a MAT PC located at a
remote technical support center.
The site name, Meridian 1 system name, and Meridian 1 customer number
must exist in the MAT Navigator before you can add a new ITG node.
Multiple ITG ISL trunk nodes can be added in the MAT ITG ISDN IP Trunks
application per Meridian 1 customer.
Note: If you use multiple MAT PCs to manage the same ITG network,
and the PCs are not using file-sharing, caution must be taken to
synchronize the different copies of the ITG database. You can use the
MAT ITG menu
Configuration | Synchronize | Retrieve
function to
synchronize the MAT ITG database with the ITG node’s database.