Filter
Top Products
Page 184 of
378
Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
CHID xxx First Channel ID for unit 0 on this ITG card, where:
xxx =
1-259 for the NT0961AA 24-port ITG Trunk card
1-375 for the NTCW80 8-port ITG Trunk card
Standard First CHID Configuration (24 and 8 Port):
Leader 0 -- 1
Leader 1 -- 25
Follower -- 49
Follower -- 73
Follower -- 97
Follower -- 121
...
The same First CHID must be entered in MAT ITG
ISDN IP Trunk Node Properties, Card
Configuration, and “First CHID” field for this card.
The standard First CHID matches the trunk route
member number for the trunk unit 0 in order to
facilitate administration and maintenance.
...
STRI
WNK
Start Arrangement Incoming.
Wink Start is preferred for ITG Trunk.
STRO
WNK
Start Arrangement Outgoing.
Wink Start is preferred for ITG Trunk.
SUPN YES Answer supervision is required.
...
CLS
DIP
Class of Service.
Dial Pulse is required for ITG ISL Trunk to avoid
busying multiple Digitone receivers when ITG
Trunk card faults occur.
...
Table 35
LD 14 - Configure ITG ISL 8- or 24-port trunk cards and units (Part 3 of 3)
Prompt Response Description