Filter
Top Products
Maintenance Page 315 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Table 53
DSP commands
Command Description
DSPReset
DSP Number Reset the indicated DSP.
Example:
ITG>DSPReset 0
DSPSelfTest
DSP Number Run self-test on the DSP.
Example:
ITG>DSPSelfTest 0
DSPNumShow
Print number of DSPs on ITG card.
Example:
ITG>DSPNumShow
DSPPcmLpbkTestOn
Start PCM loopback test on the indicated DSP.
Example:
ITG>DSPPcmLpbkTestOn
DSPPcmLpbkTestOff
Stop PCM loopback test on the indicated DSP.
Example:
ITG> DSPPcmLpbkTestOff
DSPSndLpbkTestOn
Start Send loopback test on the indicated DSP.
Example:
ITG> DSPSndLpbkTestOn
DSPSndLpbkTestOff
Stop Send loopback test on the indicated DSP.
Example:
ITG> DSPSndLpbkTestOff
DSPRcvLpbkTestOn
Start Receive loopback test on the indicated DSP.
Example:
ITG> DSPRcvLpbkTestOn
DSPRcvLpbkTestOff
Stop Receive loopback test on the indicated DSP.
Example:
ITG> DSPRcvLpbkTestOff