Filter
Top Products
Appendix D: Configure a Netgear RM356 modem router for remote access Page 363 of
378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
13 Enter menu selection number 1 to edit the first static route.
"Menu 12.1 - Edit IP Static Route" is displayed.
14 Type in a descriptive route name e.g. "DefaultGW" (no spaces).
Toggle "Active=Yes/No" for security purposes. Destination IP address
can be the default network route "0.0.0.0", or a specific network or host
route for greater security. The gateway IP address is the Management
GW IP address on the E-LAN where the modem router is connected.
Press Enter to confirm and save data to ROM, then press Esc to return
from the sub-menu to the main menu.
15 Enter menu selection number 13, "Default Dial-in Setup", under the
"Advanced Applications" section.
"Menu 13 - Default Dial-in Setup " is displayed.