Filter
Top Products
Page 278 of
378
OA&M using the ITG shell CLI and overlays
553-3001-202 Standard 1.00 April 2000
3 When prompted to login, enter current username and password.
Default is:
VxWorks login: itgadmin
Password: itgadmin
ITG>
Only one person can use the ITG shell at a time. Any session, local or
Telnet, can be overridden by a second session. The second user
receives a warning before the login and must confirm to complete the
login. There is a 20-minute Telnet shell activity time out limit.
4 You can increase the Telnet terminal buffer size to capture multiple
screens of data from the ITG card:
From the Telnet “Terminal” menu, select “Preferences”. Set the Buffer
Size to a larger value, e.g. 1000, and click “OK”. You will have to set
the Telnet buffer size only on occasion, because Telnet preferences
are automatically saved.
5 To prevent the loss of diagnostic data from the ITG card if the Telnet
session terminates unexpectedly, you must enable logging of Telnet
sessions on your MAT PC:
From the Telnet “Terminal” menu, select “Start Logging”, and use the
“Browse” dialog to indicate the appropriate folder and file name for
Telnet log file for the current Telnet session. You can open the Telnet
log file using a text editor, such as Windows 9x Notepad, or a word
processor for large log files.
Change the default ITG shell password to maintain access
security
You must schedule routine changes of user names and passwords to maintain
access security. The ITG user name and password protects maintenance port,
FTP, and Telnet access to the ITG card over the LAN.
1 From the ITG shell use the command shellPasswordSet to change
the default user name and password for Telnet to ITG shell and FTP
to the ITG card file system. The default user name is itgadmin and the
default password is itgadmin.
You will be prompted for the current user name: