Filter
Top Products
Page 270 of
378
OA&M using MAT applications
553-3001-202 Standard 1.00 April 2000
Note: For more information about Alarm Notification, please refer to
the MAT Alarm and Event Management User Guide.
Meridian 1 system commands - LD 32
You can perform the following Meridian 1 system administration commands:
• “Disable the indicated ITG card” on page 272.
Note 1: The ITG card must be disabled before card properties can be
transmitted from the MAT ITG application to the card.
Note 2: The card reset button is only available in the MAT ITG
application when the card is disabled.
Note 3: Disabling the ITG card in overlay 32 does not disable the active
leader or backup leader functions.
• “Disable the indicated ITG card when idle” on page 273.
Figure 56
OM Report scheduling window