Filter
Top Products
OA&M using the ITG shell CLI and overlays Page 287 of
378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Backup and restore from the ITG command line interface
This procedure can be used when the preferred method, using the MAT ITG
PC, is not available. This whole procedure must be performed when a
configuration file has been changed.
You must first use the ‘Put’ commands to back up the ITG card configuration
files. You can later restore the files using the ’Get’ commands.
However, you can use the "DPAddrTGet" file to restore the Dialing Plan file
from another ITG card in the same node.
Backup from the ITG command line interface
1 Identify an appropriate FTP host and get the IP address, the user
name, the password, and a directory path on the host.
2 Log in to the ITG shell of the Leader 0 ITG card of the ITG node.
3 Use the BootPFilePut command with the appropriate parameters, to
backup the Node Properties file to the FTP host.
4 Use the DPAddrPut command with the appropriate parameters, to
backup the Dialing Plan file to the FTP host.
5 For each ITG card, log in to the ITG shell and use the configFilePut
command to backup the card properties files. Each file must be named
to identify the card it goes with.
Restore from the ITG command line interface
To restore configuration when the MAT ITG PC is not available to retransmit
the ITG configuration data, use the appropriate ’Put’ commands:
1 Use the BootPFileGet command with the appropriate parameters, to
restore the Node Properties file from the FTP host to the ITG card.
2 Login to the ITG shell for each card that requires a Dialing Plan restore.
Use the DPAddrPut command with the appropriate parameters, to
backup the Dialing Plan file from the FTP host, or from another ITG
card in the node that has a valid copy of the Dialing Plan, to each card.
Each card requires a valid copy of the Dialing Plan.