Filter
Top Products
Install and configure ITG ISL Trunk node Page 231 of
378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Configure MAT Alarm Management to receive
SNMP
traps from ITG ISL Trunk cards
You must have the MAT Alarm Management option enabled to perform these
procedures. For the procedure to activate SNMP trap generation on the ITG
Trunk node, see “Configure SNMP Traps/Routing and IPs tab” on page 204.
Enter the IP address of the MAT PC as described in the procedure referenced
above.
1 In the MAT Navigator window select Utilities | Alarm Notification.
The "MAT Alarm Notification" dialog box appears.
2 Select Configuration | Run Options. The "Alarm Notification Run
Options" dialog box appears.
3 Click the Control Files tab.
4 Click Devices | Browse. The "Open" dialog box appears. .