321 Studios (ITG) Trunk 2.0 Coffeemaker User Manual


 
Page 333 of
378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
352
Appendix A: Cable description and
NT8D81BA cable
replacement
This appendix describes the NTMF94EA, NTCW84KA, NTAG81CA,
NTAG81BA, NTCW84LA and NTCW84MA cables. This appendix also
explains how to replace the NT8D81BA ribbon cable with the NT8D81AA
ribbon cable. If you have a network that uses 100-Base-T and you have an
NT8D81BA ribbon cable, you must install an NT8D81AA cable.
NTMF94EA E - LAN, T - LAN and Serial Port cable
The NTMF94EA cable connects the I/O connector on Option 11 or large
systems to the E-LAN, T-LAN and one RS232 port. (See Figure 58 and
Table 57.)