Filter
Top Products
Page 272 of
378
OA&M using MAT applications
553-3001-202 Standard 1.00 April 2000
Disable the indicated ITG card
To disable the indicated ITG card in LD 32, use the following command:
DISU l s c u Disable the indicated unit,
where: l = loop, s = shelf,
c = card, u = unit
ENLC l s c Enable the described card,
where: l = loop, s = shelf,
c = card
ENLU l s c u Enable the described unit,
where: l = loop, s = shelf,
c = card, u = unit
IDC l s c Print the Card ID information for the
described card,
where: l = loop, s = shelf,
c = card
STAT l s c Print the Meridian 1 software status
of the indicated card.
where: l = loop, s = shelf, c = card
STAT l s c u Print the Meridian 1 software status
of the indicated unit,
where: l = loop, s = shelf, c = card,
u = unit
DISC l s c Disable the indicated ITG card,
where: l = loop, s = shelf,
c = card
Table 42
Overlay 32 - ITG maintenance commands
Command Function