Filter
Top Products
Page 254 of
378
OA&M using MAT applications
553-3001-202 Standard 1.00 April 2000
Add Dialing Plan entries
The dialing plan provides translation between the dialed digits and the IP
address of the remote ITG node. Right click on any card in the node and select
menu
Node | Node Dialing Plan
. The ITG Dialing Plan window appears (see
Figure 49).
There is one dialing plan for each ITG node in the network; it is transmitted
to each card. When the dialing plan is changed, dial plan synchronization
status is set to “Changed” for each card in the node. The card does not have
to be disabled.
You can view the dialing plan data sorted by digits dialed. select menu
View
| Digits Dialed
. To return to the remote node view, select menu
View |
Remote Nodes
.
The following comments apply to the ITG Dialing Plan windows:
• The Node name is derived from the Node Properties if the node is
defined on this MAT PC. If not, the Node name entered in the property
sheet is displayed.
• If there are many digit strings in a column, the first five appear in the list
followed by dots. To see all strings, you must open the property sheet.
• The Quality of Service column has the following two parts:
Figure 49
Dialing Plan - Remote Node view