Filter
Top Products
Install and configure ITG ISL Trunk node Page 207 of
378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Set Security for MAT SNMP access
This procedure explains how to change the SNMP community names. which
you change to provide better security for the ITG node. MAT uses the
community name password to refresh the ITG Trunk node and card status,
and to control the transmitting and retrieving of files for database
synchronization.
Note: If you forget the community names, connect a TTY to the ITG
card maintenance port. Restart the card. The card displays the
community name on the tty during startup.
1 Click the Security tab (see Figure 35).
2 Change the default Read only and Read/Write default community
names. MAT uses the previous read/write community name to transmit
the card properties. The first time you transmit data after changing the
password, MAT uses the Previous read/write password. MAT uses the
changed password for all following data transmissions.
Figure 35
ITG Node Properties window - Security tab