Filter
Top Products
Tutorials
2-58 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Figure 2-36: The Standard Function dialog box
4. Confirm that the knob icon is located to the right of the Type field items.
This is the default selection for this dialog box. If Type is not selected, use the
y or b button on the front panel to select the Type field.
5. Turn the general purpose knob to highlight the Sine field item.
Note that Sine is the default selection.
6. Push the b button twice to select the Cycle field.
7. Turn the general purpose knob to set the cycle to 5.0.
8. Push the Enter button to enter the value in the field.
9. Push the OK side button.
You have created a five–cycle sine wave with a peak–to–peak range of 2.0 digital
to analog converter (DAC) units, as shown in Figure 2-37.