Tektronix AWG710B Ventilation Hood User Manual


 
AWG710&AWG710B Arbitrary Waveform Generator User Manual 1-1
Getting Started
This section provides the following information:
Description and features of the AWG710&AWG710B Arbitrary Waveform
Generator
Initial inspection procedure
Standard and optional accessories listings
Installation procedures
Power on and off procedures
Repackaging procedure for shipment
Product Description
The AWG710&AWG710B Arbitrary Waveform Generator is a waveform
generator that can generate simple and arbitrary waveforms and generates
one–channel differential output arbitrary waveforms and function generator
waveforms.
The AWG710&AWG710B Arbitrary Waveform Generator allows you to create
sine, triangle, square, ramp, and complex waves, as well as direct current and
noises signals. It allows you to set waveform attributes, such as frequency,
amplitude, and offset.
This instrument contains a hard disk drive, a 3.5–inch floppy disk drive, and
Ethernet interface for storing and recalling waveform data and instrument settings.
You can remotely control the instrument by sending commands through both the
GPIB and 100/10BASE–T interfaces, as well as transfer waveform data directly
from a digital storage oscilloscope to the AWG710&AWG710B Arbitrary
Waveform Generator using the GPIB interface. This enables you to use the
instrument in combination with other measurement equipment and a computer.
Main Features
The AWG710&AWG710B Arbitrary Waveform Generator contains the following
main features:
4.2 GS/s Sampling Rate: AWG710B
4.0 GS/s Sampling Rate: AWG710
8–bit DA converter