Filter
Top Products
The APPL Menu
3-146 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Generating Waveform
The network test reading waveform is generated based on the input data, isolated
pulse, and superpose parameters. To generate a waveform, press the Execute side
button.
The clock frequency is the same as the bit rate is set in the Marker 1. When the
sample rate is 1, the clock frequency that is half the bit rate is set in Marker 1. The
input data is set in Marker 2.
Saving to File
You can save the generated waveform to a file. If the waveform length does not
satisfy the instrument waveform file length conventions, the instrument repeats the
data several times and regenerates the waveform to create a valid file.
D2 NRZ 143.1800 Mbps 1 143.180 MS/s
D1 NRZ 270.0000 Mbps 1 270.000 MS/s
Table 3-40: Network parameters
Standard Line code Bit rate Samples/
bit
Clock
NOTE. The clock attribute of a generated waveform is the one defined in the
standard.