Filter
Top Products
Operating Basics
2-34 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Setup Overview
The Setup screen is where you load and set up the waveform for output. This
section gives you an overview of the Setup screen, how to load a file, how to set
the signal output parameters, and how to enable signal output. Refer to The Setup
Menu on page 3-33 in the Reference section for more information.
Main Setup Screen
To display the main Setup screen, push the SETUP front–panel button. The
instrument displays the main Setup screen as shown in Figure 2-24. Table 2-10
describes the screen waveform parameter icons. Table 2-11 lists the bottom menu
functions.
Figure 2-24: Main Setup screen (except option02)
Clock frequency Run mode Instrument status
Bottom menu
Number of points for
loaded waveform
Waveform
parameter icons
Side
menu
area