Filter
Top Products
FG Mode
3-236 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Parameters
Output parameters
The output parameter menu selections are the same for each waveform except
Pulse and DC. Pulse has one extra side menu item (Duty), and DC has only one
side menu item (Offset). In the case of option 02, output level is fixed in 0V in the
DC function.
Figure 3-79: Output parameters (except option 02)
Frequency
The frequency is set with a 4–digit number from 1.000 Hz to 400.0 MHz using the
SAMPLE RATE / SCALE knob, the numeric buttons or the general purpose knob.
The internal cut–off filter used is determined by the waveform type and the
frequency selected. The cut–off frequencies are as follows; (except option02)
Output
paramete
r