Filter
Top Products
Waveform Mixing Mode
3-242 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Change the generator mode
AWG mode to Waveform
Mixing mode
The instrument initializes in the AWG mode when powered on.
Do the following to change the generator mode from AWG to Waveform Mixing:
1. Push SETUP (front–panel)!Extended Operation (bottom)!
Waveform Mixing... (side) button.
The instrument displays the Waveform Mixing mode screen.
Waveform Mixing mode to
AWG mode
Do the following to change the generator mode from Waveform Mixing to AWG:
1. Push Exit Mix... (bottom) button.
The instrument returns to the AWG mode.
Figure 3-84: Change the generator mode
All bottom menus except the Waveform/Sequence menu are same as AWG mode,
and the setting value of each parameter is also common.
To
Waveform
Waveform Mixing mode screenAWG SETUP screen
To AWG
mode
NOTE. When the instrument runs in Waveform Mixing mode, you cannot use
Synchronous Operation mode or FG mode.