Filter
Top Products
Synchronous Operation Mode (AWG710B only)
3-252 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Change the generator mode
AWG mode to
Synchronous Operation
mode
The instrument initializes in the AWG mode when powered on.
Do the following to change the generator mode from AWG to Synchronous
Operation:
1. Push SETUP (front–panel)!Extended Operation (bottom)!
Sync - Master... or Sync - Slave... (side) button.
The instrument displays the Synchronous Operation mode screen.
Synchronous Operation
mode to AWG mode
Do the following to change the generator mode from Synchronous Operation to
AWG:
1. Push Exit Sync... (bottom) button.
The instrument returns to the AWG mode.
Figure 3-87: Change the generator mode
To
Sync-Master
mode
Synchronous Operation mode Sync-Master screenAWG SETUP screen
To AWG
mode
Synchronous Operation mode Sync-Slave screen
To
Sync-Slave
mode
To AWG
mode