Filter
Top Products
Appendix B: Performance Verification (AWG710)
B-64 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Performance
Check/Adjustment Files
Table B-6 lists the sequence and waveform files on the Performance
Check/Adjustment disk that are used in these performance tests, the AWG710
Arbitrary Waveform Generator front–panel settings that each file sets up, and the
performance test that uses each file.
NOTE. The files on the Performance Check disk are locked (the files are marked
by the icon in the file list), so the data in these files cannot be changed unless
the lock is opened.
Table B-6: Waveforms and sequences in performance check disk
No. File name EDIT menu SETUP menu Marker
setup
Usage
Form Points Clock Filter Ampl Offset
1 MODE.WFM 1000 4 GHz Through 1 V 0 V Marker
1,2: 0 to
499:
High,
500 to
999: Low
Run mode,Trigger level,
Internal trigger accuracy
2 PULSE.WFM 1000 100 MHz Through 1 V 0 V Pulse response
3AMP1.SEQ Amplitude accuracy
(Normal out), Marker
4AMP2.SEQ Amplitude accuracy
(Direct out)
5DC_P.WFM
(AMPx.SEQ)
1
1000 100 MHz Through 1 V 0 V Amplitude accuracy
6DC_M.WFM
(AMPx.SEQ)
1
1000 100 MHz Through 1 V 0 V Amplitude accuracy
7DC0.WFM
(AMP2.SEQ)
1000 100 MHz Through 1 V 0 V Amplitude accuracy
8 OFFSET.WFM 1000 100 MHz Through 20 mV 0 V Offset accuracy
9 TRIG.WFM 1000 1 MHz Through 1 V 0 V Trigger input
10 PT_EVENT.SEQ Event input
11 PT_STROB.SEQ Event input