Tektronix AWG710B Ventilation Hood User Manual


 
Appendix A: Specifications (AWG710B)
A-8 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Table A-13: Auxiliary inputs
Characteristics Description PV reference page
Trigger input
5
Connector Rear panel BNC connector
Impedance 1 k or 50
Polarity (Trigger mode)/
Slope (Gated mode)
POS (positive) or NEG (negative)
Input voltage range ±10 V, into a 1 k load
±5 V, into a 50 load
Threshold
Level -5.0 V to 5.0 V
Resolution 0.1 V
Triggered mode
See Figure A-1 on page A-9
Minimum pulse width 10 ns, 0.2 V amplitude
Trigger hold off time 109.5 clocks + 500 ns ; Single operation
109.5 clocks + 700 ns ; Synchronous operation
Delay to analog out, Typical 275.5clocks + 17 ns (Output: Norm, Filter: Through)
Gated mode See Figure A-2 on page A-10
Minimum pulse width 1152 clocks + 10 ns, 0.2 V amplitude
Gate hold off time 1920 clock + 20 ns (The time interval between the last gate off point and the next gaate on
point)
Delay to analog out, Typical (1355 to 1563.5) clocks + 9 ns (Output: Norm, Filter: Through)
5
The characteristics are specified at the end of the BNC cable (012–0482–00).