Filter
Top Products
Appendix A: Specifications (AWG710)
AWG710&AWG710B Arbitrary Waveform Generator User Manual A-33
Table A-39: Auxiliary inputs
Characteristics Description PV reference page
Trigger input
5
Connector Rear panel BNC connector
Impedance 1 kΩ or 50 Ω
Polarity (Trigger mode)/Slope (Gated
mode)
POS (positive) or NEG (negative)
Input voltage range ±10 V, into a 1 kΩ load
±5 V, into a 50 Ω load
Threshold
Level -5.0 V to 5.0 V
n Accuracy ±5 % of level ± 0.1 V Page B-87
Resolution 0.1 V
Triggered mode
See Figure A-11
Minimum pulse width 10 ns, 0.2 V amplitude
Trigger hold off time ≤ 109.5 clocks + 500 ns
Delay to analog out, Typical 211.5 clocks + 17 ns (Output: Norm, Filter: Through)
Gated mode
Minimum pulse width 1152 clocks + 10 ns, 0.2 V amplitude
Gate hold off time ≤ 1920 clock + 20 ns
Delay to analog out, Typical (1335 to 1499.5) clocks + 9 ns (Output: Norm, Filter: Through)
5
The characteristics are specified at the end of the BNC cable (012–0482–00).