Filter
Top Products
Appendix A: Specifications (AWG710B)
A-2 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Electrical Specification
Table A-1: Operation modes
Characteristics Description
Continuous Waveform is continuously output in this mode. When a sequence is defined, waveforms are
sequentially or repeatedly output in the order defined by the sequence. The extended
sequence functions such as trigger input, event jump, and so on are neglected in this mode.
Triggered Waveform is output only once when a trigger event is created. A trigger signal is created by
the external trigger input signal, GPIB trigger command, and/or pressing the front–panel
FORCE TRIGGER button. The extended sequence functions such as trigger input, event
jump, and so on are neglected in this mode.
Gated The waveform is output in the same way as in the continuous mode only when the gate is
opened. The gate is opened by the gated signal.
Note that the output is made from the top of the first waveform for every gate period. The clock
signal continuously outputs from the connector outside the gate period.
Enhanced The waveforms are sequentially or repeatedly output according to the procedures defined in
the sequence. All extended functions such as trigger input, event jump, and so on are effective
and waveforms are controlled for output by this functions in this mode.
Table A-2: Extended Operation
Characteristics Description
FG operation This mode provides user-friendliness like the conventional function generator. The output
waveforms are Sine, Triangle, Square, Ramp, Pulse and DC waveform. AWG710B is in AWG
mode when this mode is not selected.
Waveform Mixing operation This mode provides the function for mixing two-signals digitally.
Synchronous Master operation This mode provides the setup for using as a Master instrument on Synchronous Operaion.
Synchronous Slave operation This mode provides the setup for using as a Slave instrument on Synchronous Operation.
Table A-3: Arbitrary waveforms
Characteristics Description
Waveform memory Memory length: 32 400 000 words (8 bits/1 word)
Op.01 Memory length: 64 800 000 words (8 bits/1 word)
Marker memory Memory length: 132 400 000 words (2 markers × 1 bit / 1 word)
Op.01 Memory length: 64 800 000 words (2 markers × 1 bit / 1 word)
Sequence memory 1 to 8000 steps