Filter
Top Products
Tutorials
2-66 AWG710&AWG710B Arbitrary Waveform Generator User Manual
If you connected an oscilloscope to the AWG710&AWG710B Arbitrary
Waveform Generator, observe that the waveform on the oscilloscope changes as
soon as you make changes to the Quick Editor window.
Save Changes
The waveform in the edit buffer is copied into the Undo buffer before going into
the Quick edit mode. Quick editing is performed on the waveform data in the edit
buffer. When you quit the Quick Editor, you can save the changes or cancel the
changes.
When you save the changes, the instrument does not take any action, as the
waveform data is already current. When you select cancel the changes, the
instrument copies the contents of the Undo buffer back to the edit buffer.
Do the following steps to save the Quick Edit mode changes you just made:
1. Push the QUICK EDIT button on the front panel to quit the quick editor.
A message box appears at the center of the screen and the side menu displays
Cancel, No, and Yes menu items.
2. Push the Ye s side button to save the changes.
If you have connected an oscilloscope to the AWG710&AWG710B Arbitrary
Waveform Generator, the waveform being displayed on the oscilloscope
screen shows the new waveform.
Remember that the waveform in the Quick Editor does not affect the waveform in
the waveform memory unless you save it to the file.
You have completed the Editing a Waveform Using Quick Editor tutorial.