Filter
Top Products
The UTILITY Window
3-158 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Screen Display Enable/Disable
In some instances, such as having the AWG710&AWG710B installed in a rack
mount, you may not want to have the LCD back light turned on.
Do the following steps to turn off the LCD Back Light:
1. Push UTILITY (front–panel)!System (bottom)!LCD Back Light (screen)
2. Turn the general purpose knob or a ' buttons to enable or disable the Screen
Display.
Push CLEAR MENU (front–panel) twice to turn on the LCD Back Light.
Focused Color
Do the following steps to adjust the Hilight Color:
1. Push UTILITY (front–panel)!System (bottom).
2. Select Hilight Color: using the y and b buttons.
3. Turn the general purpose knob clockwise or counterclockwise until you get the
color you want.
The changes take effect immediately. You can display the system utility screen and
set the highlight color at any time without exiting current tasks.
Displaying Instrument Status
Do the following steps to display the instrument software version and status of the
SCPI registers.
1. Push UTILITY (front–panel)!Status (bottom)!System (side) to display the
instrument software version.
2. Push UTILITY (front–panel)!Status (bottom)!SCPI Registers (side) to
display the current status of the SCPI registers.
Refer to the AWG710&AWG710B Arbitrary Waveform Generator Programmer
Manual for the SCPI registers.