Filter
Top Products
Appendix C: Inspection and Cleaning
C-2 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Cleaning Procedure —
Exterior
1. Remove loose dust on the outside of the instrument with a lint–free cloth.
2. Remove remaining dirt with a lint free cloth dampened in a general purpose
detergent–and–water solution. Do not use abrasive cleaners.
3. Clean the monitor screen with a lint–free cloth dampened with either ethyl
alcohol or, preferably, a gentle, general purpose detergent–and–water solution.
Cleaning the
Instrument Interior
Only qualified personnel should access the inside of the AWG710&AWG710B for
inspection and cleaning, refer to the Maintenance section in the
AWG710&AWG710B service manual.
WARNING. To avoid injury or death, unplug the power cord from line voltage
before cleaning the instrument. To avoid getting moisture inside the instrument
during external cleaning, use only enough liquid to dampen the cloth or applicator.