Tektronix AWG710 Ventilation Hood User Manual


 
Waveform Mixing Mode
AWG710&AWG710B Arbitrary Waveform Generator User Manual 3-245
waveform or pattern file loaded in a waveform A or a waveform B. You cannot
view files other than waveform or pattern in this function. When you display a
mixed waveform on the screen, save it as a waveform file and open it on the
waveform editor.
Do the following steps to display a loaded file:
1. Push Waveform/Sequence (bottom)!View... (side)!View A or View B...
(side)
Waveform Mixing parameters
A mixed waveform is generated by the following formula to two specified
waveforms.
Mixed.wfm = A.wfm * Ratio of A + B.wfm * Ratio of B
Ratio of A...
Ratio of B...
The ratio of Waveforms A and B is specified with a Ratio of A and Ratio of B
button. The range of these parameters is as follows:
0 Ratio of A (%) + Ratio of B (%) 100 (%)
1. Push Waveform/Sequence (bottom)!Setting... (side)!Ratio of A or Ratio
of B (side)
2. Use the general purpose knob, numeric buttons, or keyboard to change the ratio
of Waveform A and B.
Marker
This button lets you select which marker of Waveforms A or B is used as a marker
of a mixed waveform. The marker of the selected waveform is applied repeatedly
and let it be the marker of a mixed waveform until it fills the waveform length of a
mixed waveform.
1. Push Waveform/Sequence (bottom)!Setting... (side)!Marker (side)
2. Push the Marker side button to toggle between Same as A and Same as B.
Wfm Len
This button lets you specify the length of a mixed waveform. It is specified from
the following:
Same as A: The number of points of a mixed waveform is made the same as
the number of points of Waveform A. When the number of points of Waveform