Tektronix AWG710 Ventilation Hood User Manual


 
Appendix A: Specifications (AWG710)
AWG710&AWG710B Arbitrary Waveform Generator User Manual A-27
Appendix A: Specifications (AWG710)
This section contains theAWG710 Arbitrary Waveform Generator specifications.
All specifications are guaranteed unless labeled “typical”. Typical specifications
are provided for your convenience but are not guaranteed.
Specifications that are marked with the
n symbol in the column Characteristics
are checked in Appendix B: Performance Verification and the page number
referenced to the corresponding performance verification procedures can be found
in the column PV reference page.
The characteristics in the specifications are listed in tables that are divided into
categories. In these tables, the subcategories may also appear in boldface under the
column Characteristics.
Performance Conditions
The performance limits in this specification are valid with these conditions:
The AWG710 Arbitrary Waveform Generator must have been
calibrated/adjusted at an ambient temperature between +20
° C and +30° C.
The AWG710 Arbitrary Waveform Generator must be in an environment with
temperature, altitude, humidity, and vibration within the operating limits
described in these specifications.
The AWG710 Arbitrary Waveform Generator must have had a warm–up period
of at least 20 minutes.
The AWG710 Arbitrary Waveform Generator must be operating at an ambient
temperature between +10
° C and +40° C.
Warranted characteristics are described in terms of quantifiable performance limits
which are warranted.