Filter
Top Products
Tutorials
2-52 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Set the Date and Time
Do the following steps to set the year:
1. Repeatedly press the b button in the upper middle part of the front panel until
the Year: field is highlighted on the screen.
2. Turn the general purpose knob in the right upper corner of the front panel,
clockwise or counterclockwise until the word year is displayed.
When using the general purpose knob, note that the current displayed year in the
Year: field, is displayed in the upper right corner of the screen with the knob icon.
This means that you can adjust the value using the general purpose knob.
Do the following steps to set the month and day:
1. Press the b button once to highlight the Month:.
2. Use the general purpose knob to set the month.
3. Set the date in the Day: as was done in step 1 and 2 above.
4. Using the b button and the general purpose knob, set the hour, minute and
second in the Hour:, Min: and Sec:, respectively, as were done in step 1 above.
Set the Focused Color
Do the following steps to set the focused color:
1. Repeatedly press the b button until the Hilight Color: is selected.
2. Turn the general purpose knob clockwise or counterclockwise while looking at
the screen until you get the color what you want.
The changes made during this tutorial take effect immediately. You can display the
system utility screen and adjust the focused color at any time without exiting current
tasks.
You have completed the Instrument Setup tutorial.
LCD Back Light
The default for the LCD back light is the on state.
Do the following steps to disable the LCD back light:
1. Repeatedly press the b button until the LCD Back Light is highlighted.
2. Press the a button or turn the general purpose knob to the left.
Do the following to turn on the instrument display:
1. Press the ON/STBY button to power on.
2. Press the CLEAR MENU button on the front–panel twice.
You have completed the Instrument Setup tutorial.
NOTE. The LED display state is saved when you turn the instrument off by pressing
the ON / STBY button.