Filter
Top Products
AWG710&AWG710B Arbitrary Waveform Generator User Manual 2-49
Tu t o ri a l s
This section contains tutorials to help you learn how to operate the
AWG710&AWG710B Arbitrary Waveform Generator. These tutorials provide a
good introduction to the following basic features of the instrument:
Setting up the instrument
Loading and outputting a sample waveform
Creating and editing standard function waveforms
Editing a waveform using quick editor
Using the equation editor
Creating and executing sequences
By connecting an oscilloscope to the AWG710&AWG710B Arbitrary Waveform
Generator and observing the waveforms output, you will understand how the
AWG710&AWG710B Arbitrary Waveform Generator works. The following
equipment and accessories are needed:
A digital storage oscilloscope
(A Tektronix TDS–Series oscilloscope or equivalent)
One 50 Ω SMA cable
One 50 Ω SMA terminator
One SMA (Fe)–BNC (Ma) adapter
Connect the digital storage oscilloscope to the AWG710&AWG710B Arbitrary
Waveform Generator as shown in Figure 2-30.
NOTE. These tutorials do not cover all the features and functions of the
AWG710&AWG710B Arbitrary Waveform Generator. They are intended only to
introduce the basic instrument functions.
NOTE. The CH1 LED is off when a signal is being output from CH1.
If the CH1
LED is on, turn off the output by pushing the CH1 OUT button.