Tektronix AWG710 Ventilation Hood User Manual


 
Appendix A: Specifications (AWG710)
A-38 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Table A-47: Installation requirement
Characteristics Description
Heat dissipation
Maximum power 220 VA (maximum line current: 3 A
rms
, at 50 Hz)
Surge current
30 A (25 °C) peak for equal to or less than 5 line cycles,
after the instrument has been turned off for at least 30s
Cooling clearance
To p,
Bottom
2 cm (0.8 in)
2 cm (0.8 in)
NOTE: The feet on the bottom provide the required clearance when set on a
flat surface.
Sides 15 cm (6 in)
Rear 7.5 cm (3 in)
Table A-48: Environmental
Characteristics Description
Atmospherics
Temperature
Operating +10 °C to +40 °C
Non-operating -20 °C to +60 °C
Relative humidity
Operating 20 % to 80 % (no condensation)
Maximum wet–bulb temperature 29.4 °C
Non-operating 5 % to 90 % (no condensation)
Maximum wet–bulb temperature 40.0 °C
Altitude (Hard disk drive restriction)
Operating Up to 3 km (10 000 ft)
Maximum operating temperature decreases 1 °C each 300 m (1 000 ft) above 1.5 km (5 000
ft)
Non-operating Up to 12 km (40 000 ft)
Dynamics
Random vibration
Operating 2.65 m/s
2
rms (0.27Grms), from 5 Hz to 500 Hz, 10 minutes
Non-operating 22.36 m/s
2
rms (2.28Grms), from 5 Hz to 500 Hz, 10 minutes
Shock
Non-operating 294 m/s
2
(30 G), half–sine, 11 ms duration