Filter
Top Products
Appendix B: Performance Verification (AWG710B)
AWG710&AWG710B Arbitrary Waveform Generator User Manual B-3
The result of the diagnostics are shown as error code. Pass means that the tests have
been made without error. If an error is detected, an error code is displayed.
You can also specify how many times the diagnostic tests are performed. Push the
Cycle side button and then turn the general purpose knob to select the cycle from
1, 3, 10, 100 or Infinite. When you select Infinite, the tests are repeatedly
performed, and are not be terminated until you push the Abort Diagnostic side
button.
Figure B-1: Diagnostic menu
Do the following to execute all of the AWG710B Arbitrary Waveform Generator
diagnostics automatically:
Push the Execute Diagnostic side button.
The internal diagnostics do an extensive verification of AWG710B Arbitrary
Waveform Generator functions. While this verification progresses, the screen
displays the clock icon. When finished, the resulting status appears on the screen.
Verify that no failures are found and reported on–screen. If the diagnostics
terminates without error, Pass is displayed instead of the – – –. If a value is
displayed, meaning an error is detected, consult a qualified service technician for
further assistance.