Filter
Top Products
Appendix A: Specifications (AWG710)
AWG710&AWG710B Arbitrary Waveform Generator User Manual A-35
Table A-40: Event Input
Characteristics Description
Connector 9–pin, D type on the rear panel
Number of events 4 bits
Input signal 4 event bits and Strobe
Threshold TTL level
Maximum input 0 V to + 5 V (DC + peak AC)
Impedance 1 kΩ, pull–up to +3.3 V
Enhanced mode
Minimum pulse width 320 clocks + 10 ns
Event hold off time ≤ 896 clocks + 20 ns
Delay to analog out, Typical
(Jump timing: ASYNC) (Output: Norm, Filter: Through)
Strobe: On 1627.5 clocks + 7 ns
Strobe: Off 1883.5 clocks + 5 ns
Event input to strobe input
Setup time 192 clocks + 10 ns
Hold time 192 clocks + 10 ns
Table A-41: 10 MHz reference clock input
Characteristics Description
Input voltage range 0.2 V to 3.0 V
p–p
(into a 50 Ω load, AC coupling)
Maximum ±10 V
Impedance 50 Ω, AC coupling
Reference frequency 10 MHz ±0.1 MHz
Connector Rear panel BNC connector