Filter
Top Products
143Saving Effects
Chapter 13 Keyframe Effects
Saving Effects
When you recall an effect, the currently recalled effect is automatically saved
in a register. This is referred to as the auto save function.
You can disable the auto save function in a Setup menu.
By means of the following operation, you can also specify a register and save
an effect in it.
Saving an effect in a specified register
Specify the register using the numeric keypad control block. Use the following
procedure.
1
Press the [EFF] button, turning it on.
This allocates the numeric keypad control block to keyframe operations.
2
Press the region selection button corresponding to the region for which you
want to save the register, turning it on.
See step 2 (page 116) of “Recalling a register.”
3
Press the [STORE] button, turning it on.
4
With the numeric keypad, enter the number of the register in which you
want to save the effect.
To find an empty register, instead of entering a number, press the [.]
(period) button. To search for an empty register common to all currently
selectable regions, press the [.] button again.
To search for an empty register in the 100 range, press [1], [0], [0], [.]
(period) in this order. Similarly, to search for an empty register in the 200
range, press [2], [0], [0], [.] (period).
The register number appears in the display. If the number is followed by a
letter ‘e’ or ‘E’, this indicates the following.
e: The selected register is empty for the regions selected in step 2.
E: The selected register is empty for all selectable regions.
5
To add an attribute (effect dissolve), press the [+/–/EFF DISS] button,
turning it on.
For details of attributes, see “Effect Attributes” in Chapter 1 (Volume 1).