Filter
Top Products
Chapter 11 DME Operations
80
Global Effect Operations
2
Adjust the following parameters.
For Ch1+Ch2
a) See “Global Effects” in Chapter 1 (Volume 1).
For Ch1+Ch2+Ch3
a) See “Global Effects” in Chapter 1 (Volume 1).
Mixing pairwise the images of channels 1 and 2, and channels 3
and 4
Use the following procedure.
1
In the Combiner menu, press [Combiner1 Mix], turning it on.
2
Adjust the following parameters.
a) See “Global Effects” in Chapter 1 (Volume 1).
3
Press [Combiner2 Mix], turning it on.
4
Adjust the following parameters.
a) See “Global Effects” in Chapter 1 (Volume 1).
Automatically setting the priority of overlapping images
To set the system so that the priority of overlapping images is automatically
determined by their position on the z-axis, press [Auto], turning it on.
Knob Parameter Adjustment Setting values
1 Mix Mix degree
0.00 to 100.00
a)
Knob Parameter Adjustment Setting values
1 Mix1 Mix degree for mix of
channel 1 with result of
Mix2
0.00 to 100.00
a)
2 Mix2 Mix degree for channels
2 and 3
0.00 to 100.00
a)
Knob Parameter Adjustment Setting values
1 Mix1 Mix degree for channels
1 and 2
0.00 to 100.00
a)
Knob Parameter Adjustment Setting values
1 Mix2 Mix degree for channels
2 and 3
0.00 to 100.00
a)