Filter
Top Products
Chapter 11 DME Operations
48
DME Special Effect Operations
• When other than Shape is selected
To limit the ripple range
1
Press [Range], turning it on.
2
Set the following parameters.
• When Radial or Shape mode is selected
• When Angular mode is selected
• When Both mode is selected
2 V Ripple center point in vertical
direction
−3.000 to +3.000
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 H Ripple center point in
horizontal direction
−8.000 to +8.000
2 V Ripple center point in vertical
direction
−6.000 to +6.000
Knob Parameter Adjustment Setting values
1 Size R Amount of ripple modulation
along radius
0.00 to 100.00
2 Offset R Center of modulation range
along radius
−8.000 to +8.000
Knob Parameter Adjustment Setting values
1 Size A Amount of ripple modulation along
periphery
0.00 to 100.00
2 Offset A Center of modulation range along
periphery
−8.000 to +8.000
Knob Parameter Adjustment Setting values
1 Size R Amount of ripple modulation
along radius
0.00 to 100.00
2 Offset R Center of modulation range
along radius
−8.000 to +8.000
3 Size A Amount of ripple modulation
along periphery
0.00 to 100.00
4 Offset A Center of modulation range
along periphery
−8.000 to +8.000