Filter
Top Products
69DME Special Effect Operations
Chapter 11 DME Operations
Flat Color: Use a flat color matte as source of the trail. You can set the
following parameters with the knobs.
Hue Rotate: Use a color matte whose hue varies slightly with each frame for
the trail of the afterimages. You can set the following parameters with the
knobs.
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [Trail Eraser], turning it on.
This erases the afterimages before another effect passes a keyframe, writing
new afterimages.
Selecting the freeze timing
In the <Trail Freeze Timing> group, select the timing for freezing a trail.
Frame: freeze in frame units.
Field: freeze in field units.
Applying stardust trails
The trail dissolves slowly in a cloud of dust.
1
Press the [DUST] button, turning it on.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Speed Speed at which the hue
changes
−12.00 to +12.00