Filter
Top Products
233Setup Relating to Operations From the Control Panel
Chapter 16 Engineering Setup
The status area shows a list of the items with their settings.
Screen saver settings
To enable the menu screen saver, use the following procedure.
1
In the Panel>Maintenance menu, press [Screen Saver], turning it on.
2
Adjust the following parameter.
Adjusting the brightness
You can adjust each of the following brightnesses independently.
LCD: Adjust the brightness of the source name displays and the LCD buttons
in the Flexi Pad control block.
LED: Adjust the brightness of the LED displays in the numeric keypad control
block and so forth.
Switch: Adjust the brightness of the panel switches.
The following description takes the LCD brightness as an example. Use a
similar process for the other adjustments.
1
In the Panel>Maintenance menu, press [LCD Brightness].
2
Adjust the following parameter.
a) The larger the value, the brighter the screen.
Adjusting the alarms
In the Panel>Maintenance menu, make the following settings.
To give audible feedback from menu touch screen operations: Press
[Touch Beep], turning it on.
Calibrating the touch panel
Use the following procedure.
1
In the Panel>Maintenance menu, press [Touch Panel Calibration].
Knob Parameter Adjustment Setting values
1 Sleep Time Time until screen saver starts
operation
1 to 300 (minutes)
Knob Parameter Adjustment Setting values
1 Brightness Menu screen brightness
1 to 5
a)