Filter
Top Products
67DME Special Effect Operations
Chapter 11 DME Operations
2
Adjust the following parameters.
Setting the bar shape of the shade area
When you select [Preset] in step 2 (see page 65) of the procedure “Applying
the Lighting effect”, use the following procedure to set the bar shape of the
shade area.
1
Turn [Shade Modify] on.
2
Adjust the following parameters.
Setting the color of the shade in the shade area
To set the color of the shade in the shade area, use the following procedure.
1
Turn [Shade Color] on.
2
Adjust the following parameters.
Trail Settings
This effect recursively freezes the input video at regular intervals so that a trail
of afterimages is created.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 X X-value of bar center point
−16.00 to +16.00
4 Width Width of bar 0.00 to 100.00
5 Soft Softness of edges 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00