Filter
Top Products
173Snapshot Operations in the Menus
Chapter 14 Snapshots
When an effect dissolve is set:
When an auto transition is set:
When a GPI output is set:
Setting Key Snapshot Attributes
Applying key snapshot attributes
To apply an attribute to a key snapshot, use the following procedure.
1
In the Snapshot menu, press VF5 ‘Key Snapshot’ and HF1 ‘Attribute.’
The Snapshot>Key Snapshot>Attribute menu appears.
The status area shows the region names, register numbers, and whether the
registers are locked or not.
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window. Selecting multiple
regions is also possible.
3
Press [OK].
The selected region name appears in the upper part of the list.
4
Using either of the following methods, select the register.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Displayed
character codes
Attributes set
Duration value The effect dissolve attribute is set, with the displayed duration.
Displayed
character codes
Attributes set
T Auto transition is set.
Displayed
character codes
Attributes set
Port number GPI output is set for the port of the displayed number.