Filter
Top Products
59DME Special Effect Operations
Chapter 11 DME Operations
2nd Ch: Use the 2nd channel video signal.
To select “2nd Ch,” it is first necessary to select the second DME on
the keyer using DME.
2
Adjust the following parameters, according to the selected input signal.
• When Flat is selected
• When Hue Rotation is selected
Roll settings
The Roll effect rolls the image up.
To apply the Roll effect
Display the Roll menu.
The knobs in the Roll menu have the same functions as those in the Page Turn
menu.
For details about operation, see “Page Turn settings” (page 58).
Cylinder settings
The Cylinder effect winds the whole image onto a cylinder.
To apply the Cylinder effect
With the Cylinder menu displayed, set the following parameters.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Speed Speed at which hue changes −12.00 to +12.00
Knob Parameter Adjustment Setting values
1 Radius Degree to which image is wound onto
the cylinder
0.00 to 100.00
2 Min R Radius of the cylinder 0.00 to 100.00
3 Offset Horizontal position of the image
wound onto cylinder
−100.00 to +100.00