Filter
Top Products
Chapter 16 Engineering Setup
222
Setup Relating to Operations From the Control Panel
To abandon the process of menu shortcut assignment
In the Prefs/Utility>Utility Module Assign menu, press [Menu Shortcut].
This exits the menu shortcut assignment mode.
Setting names to be displayed in memory recall buttons
Note
The name you set using the following procedure is displayed only when “Menu
Shortcut” or “Utility Command” has been assigned to the selected memory
recall button. To set a name for display in a memory recall button to which
“Shotbox Recall” has been assigned, use the Shotbox menu.
Use the following procedure.
1
In the Prefs/Utility>Utility Module Assign menu, select the button using
any of the following methods.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the selection.
2
Press [Name].
A keyboard window appears.
3
Enter a name of not more than eight characters, and press [Enter].
The name you have set is reflected in the status area and on the memory
recall button in the utility/shotbox control block.
Interfacing With External Devices (Device Interface
Menu)
To carry out setup relating to connections with external devices, display the
Panel>Device Interface menu.
To display the Device Interface menu
In the Engineering Setup menu, select VF2 ‘Panel’ and HF5 ‘Device
Interface.’
Knob Parameter Adjustment Setting values
1 Bank Bank selection 1 to 4
2 Button No Control block button selection 1 to 24