Filter
Top Products
213Setup Relating to Operations From the Control Panel
Chapter 16 Engineering Setup
1
In the Panel>Xpt Assign menu, press [Source Select].
The Source Select menu appears.
The upper part of the status area shows the currently selected button
number together with the currently assigned video and key signal names.
The lower part shows a list of the signals which can be assigned.
2
Turn the knob to select the button to which the assignment relates.
3
When assigning a video signal, press [Video] in the <Xpt> group. When
assigning a key signal, press [Key].
4
Use any of the following operations to assign the signal.
• Press directly on the list in the status area.
• Press the arrow keys to move the reverse video cursor.
• Turn the knob to make the setting.
To inhibit operation of certain button numbers
In the Panel>Xpt Assign menu, select the button number you want to inhibit,
then press the [Inhibit] button.
Setting the source signal name and source name display color
Use the following procedure.
1
In the Panel>Xpt Assign menu, press [Source Select].
The Source Select menu appears.
2
Turn the knob to select the signal to be set.
3
To set the source name, press [Source Name].
A keyboard window appears.
Knob Parameter Adjustment Setting values
1 Button No Cross-point button selection 1 to 128
Knob Parameter Adjustment Setting values
3 Source No Selection of source to be assigned 1 to 128
Knob Parameter Adjustment Setting values
3 Source No Source signal selection 1 to 128