Filter
Top Products
53DME Special Effect Operations
Chapter 11 DME Operations
Split Slide settings
The Split Slide effect divides the image into bars which slide alternately in
reverse directions.
To apply the Split Slide effect
With the Split Slide menu displayed, set the following parameters.
To set the partition position
Use the following procedure.
1
Press [Position], turning it on.
2
Set the following parameters.
Mirror settings
The Mirror effect partitions the image vertically and horizontally, creating an
image like a reflection in a mirror.
2 V Degree of top and bottom
separation
−3.000 to +3.000
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Transition H Degree of transition in horizontal
direction
0.000 to 100.000
2 Random H Degree of randomness in distance
moved by blocks in horizontal
direction
0.00 to 100.00
3 Skew H Degree of skew in horizontal direction 0.00 to 100.00
4 Width H Horizontal width of partition 0.00 to 100.00
5 Angle Angle of partition line −8.000 to +8.000
6 Transition V Degree of transition in vertical
direction
0.000 to 100.000
7 Random V Degree of randomness in distance
moved by blocks in vertical direction
0.00 to 100.00
8 Skew V Degree of skew in vertical direction 0.00 to 100.00
9 Width V Vertical width of partition 0.00 to 100.00
10 Angle Angle of partition line −8.000 to +8.000
Knob Parameter Adjustment Setting values
1 H Horizontal partition position −5.000 to +5.000
2 V Vertical partition position −5.000 to +5.000