Filter
Top Products
323Macro Attachment Assigning
Chapter 18 Macros
The cross-point button you pressed flashes amber, and the register you
recalled in step 1 is assigned to the button.
If you make both pre macro and post macro settings for the same
button
The later setting is valid.
To make a macro attachment setting in macro only mode
Note
To carry out this operation, it is first necessary to assign the “Macro Only Set”
function to one of the user preference buttons in the menu control block. Carry
out this assignment in the Eng Setup>Panel>Prefs/Utility menu. (For details,
see “Setting Button Assignments (Prefs/Utility Menu)” (page 218).)
To make a macro attachment in Macro Only mode, use the following
procedure.
1
Recall the macro register you want to assign to the button.
For details of recall from the numeric keypad control block, see page 311.
For details of recall from the Flexi Pad control block, see page 317.
M/E
1
M/E
1
SHIFT
SHIFT
XPT
HOLD
XPT
HOLD
PRE
MCRO
KEY3
KEY4
POST
MCRO
XPT
HOLD
XPT
HOLD
UTIL
M/E
1
M/E
1
M/E
2
M/E
2
M/E
2
M/E
2
M/E
3
M/E
3
M/E
3
M/E
3
SHIFT
SHIFT
SHIFT
MCRO
ATTCH
ENBL
PRE MCRO button
POST MCRO button
Background A row
Background B row MCRO ATTCH ENBL button