Filter
Top Products
39DME Special Effect Operations
Chapter 11 DME Operations
To turn an effect off
In the setting menu, press the button for the effect name, turning it off, or in the
Type menu press [OFF] in the lower right part of the window.
Wave settings
The Wave effect produces a wave-like effect in the image.
To apply the Wave effect
With the Wave menu displayed, use the following procedure.
1
In the <Mode> group, select the wave modulation mode.
H&V: Modulate vertically and horizontally without changing the size of
the image. This mode allows waves to be created in both the vertical
and horizontal directions at the same time.
SIZE: Create waves by reducing and expanding the image. This mode
allows waves to be created in one direction only.
2
Set the following parameters, according to the selected mode.
• When H&V is selected
1
H&V
SIZE
2
1
2
Before modulation
Size not modulated.
1 and 2 are same size.
Create waves by reducing 1
and expanding 2 the image.